Moteur de décélération à engrenage conique incliné

Transmission performance characteristics

The company's helica aear reducer is desianed on the basis of two - dimensional and three-dimensional finite element analysis software and module combination system.Model torque and transmission ratio are divided by decreasing formwhich is more in line with customer reauirements and avoidspowerwasteTheinstallation position and structure provide diversified products with fine torque and speed ratio grading.

"Strong" because of a high torque ratingabove market standards. The "low noise" is due to the optimized design of the gear geometry and the precise surface treatment ofthetoothsurfacemakingthe operation highly smoothand lownoise.

"Standardized" because ofits market-orientedsizemalaric products through modular assembly can besuitable for domestic and foreign transmission machineryapplications.Thehigh-steel castiron box with steel bars is made of HT250 materialand thealuminum alloy box is made of high-strength ZL108 material Gear and gear shaft adopt forged steel(20CrMnTiH)materialcontrollable carburizing and auenching makes the tooth surface hardnessuptoHRC60+2: Grinding accuracy of tooth surfaceis5-6levelupto4level for special reauirements: The output shaft is madeof40CrMoand45# stee materialsThe surface has been tempered and precisely machined, which ensures the parallelismandpositioning accuracyof the shaft, and can withstand large radial and axial loads.High precision maintenance free products.

MR series helical gear reducer motor withtime-testedmodular concept and strict quality standards:This particular diversityhas enabled MARALl to set a new standard for driving technology.
1. Power 018kw-160KW.
2. Decele rationratio1/165-1/14340:Two-stagedeceleration combination1:111-1:33818.
3. The torqueis 43-4000nm and the second-level deceleration is as high as 26000NM.
4. completely closed and sealed,prevent dustand water sprayinto.
5. The first change of lubricating oil is required after 25.000 hours of use.
6. Full contact of gear surfacelare stressed area and high transmission torque.
7. aood mesh performancelow vibrationlow noise.smooth transmission.
8. 220/230 of the power supply device is suitable foruniversa voltage/380/400/415/440/660/690v50/60hz broadband.
9. Shell IP55(standard) P65，66(optional).

MK series helical gear and bevel gear reducer consists of three helica gear and spiral bevel gearwhich are input end gearbevel gear and output end bevel gear successively,High strength hard tooth surface helical gear transmission torque and impact resistanceTheright- anale outout can achieve hiah efficiencyin two-wayrotation and al output speeds and the durable non-wear gear extends theservice life of the transmission device.Two-stage deceleration combination 1:94-1:32625torque, 80-50000nm

MF series parallel shaft helical gear reducer is composed of 2 stages, 3 stages deceleration and combined transmissionThereare10kinds of specificationsincluding foot horizontalflangeverticalsmall flange and torque arm installationTorque range from13N.Mto18000N.M,maximum output power 200kw;With TXFseries combination can achieve stepless speed change;Combination drive can be consulted by MARALI.

MS series helical gear wormreducerconsistsoftwo-stage
combination.which adopts high-strength helical gear with hard tooth surface and worm wheel drive,and has strongself-lockingforce for transverse movement and lifting of the portalSpeedratio:1:6.80-1:28.00;speedratio:1:110-1:33818output torque 92-4000nm:motor powerrange:0.18-37kw:Thereare7kindsof specifications in the seriesincluding bedroom foot installation,foot threaded hole installationflangevertical installationboxbody outside the end end torgue arminstallationdirect axis output;If necessary,you can choose the way of expanding disc connection.